The Cisco LTE-ANTM-SMA-D= is a 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector. The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.

You may also check all the Cisco Networking Router models we have at The Telecomshop.

Visit here for more Cisco Networking
Cisco Switches
Cisco Wireless Access Point
Cisco Network Storage System

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with Cisco 90-Day Limited Hardware Warranty

• Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz
• Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands
• Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°
• Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector
• The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated, and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.

• Product Type: Antenna
• Operating Frequencies:
- 698-960 MHz
- 1447-1511 MHz
- 1710-2690 MHz
• Polarization: Vertical, linear
• Nominal Impedance: 50 Ohms
• Peak Gain:
- 2.0 dBi (698-960 MHz)
- 2.8 dBi (1447-1511 MHz)
- 3.7 dBi (1710-2690 MHz)
• VSWR:
- ? 2.5:1 (698-960 MHz)
- ? 2.5:1 (1447-1511 MHz)
- ? 2.0:1 (1710-2690 MHz)
• Maximum RF Input Power: 5 W
• Temperature Range:
- -30°C to + 70°C (Operating)
- -40°C to + 85°C (Storage)
• DC Power: No DC power required for LTE-ANTM-SMA-D antenna operation
• Dimensions: 9” (L) x 1.46” (W) x 0.43” (D) (229 x 37 x 11 mm)
• Weight: 56.8 grams